{"id":224,"date":"2022-08-05T02:45:45","date_gmt":"2022-08-05T02:45:45","guid":{"rendered":"https:\/\/jazchye.com\/?p=224"},"modified":"2022-08-05T04:21:46","modified_gmt":"2022-08-05T04:21:46","slug":"how-to-register-telstra-business-sip-trunk-in-grandstream-networks-ucm-series","status":"publish","type":"post","link":"https:\/\/jazchye.com\/index.php\/2022\/08\/05\/how-to-register-telstra-business-sip-trunk-in-grandstream-networks-ucm-series\/","title":{"rendered":"How to register Telstra Business SIP Trunk in Grandstream Networks UCM Series"},"content":{"rendered":"\n

Grandstream Networks UCM series supports interconnecting Telstra NTU to work with Telstra Business SIP trunk service<\/a>.<\/p>\n\n\n\n

Topology:<\/strong><\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

To register Telstra Business SIP Trunk, we will need to configure from both Telstra NTU side, and UCM side.<\/p>\n\n\n\n

From Telstra NTU:<\/strong><\/p>\n\n\n\n

Topology: Gateway attached<\/p>\n\n\n\n

Register PBX: Checked<\/p>\n\n\n\n

PBX IP address: Key in the IP address of the UCM (Should be in the same subnet as NTU WAN)<\/p>\n\n\n\n

PBX Address of Record (AOR): SIP trunk call number (Should be the FNN Number with zero removed from the front)<\/p>\n\n\n\n

Authenticate PBX: Checked<\/p>\n\n\n\n

Username: SIP trunk call number (Should be the FNN Number with zero removed from the front)<\/p>\n\n\n\n

Password: Password given by your SIP provider<\/p>\n\n\n\n

Using my example, the configuration should look like this:<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

From UCM:<\/strong><\/p>\n\n\n\n

Create a Register trunk pointing to the NTU IP address (same LAN) and use Port 5062 instead of the common 5060. Telstra NTU uses local port 5062 for PBX connection as the Port 5060 was used for SIP session to the remote network.<\/p>\n\n\n\n

Provider Name: Telstra<\/p>\n\n\n\n

Host Name: 192.168.16.20:5062<\/p>\n\n\n\n

Transport: UDP<\/p>\n\n\n\n

Username: Enter SIP trunk username as given by Telstra<\/p>\n\n\n\n

Password: Enter the corresponding SIP password for this user<\/p>\n\n\n\n

AuthID: Enter the authentication number<\/p>\n\n\n\n

It should look like this:<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

Click on Save and Apply. Telstra SIP trunk should be registered now, and showing reachable under Dashboard > Trunks.<\/p>\n","protected":false},"excerpt":{"rendered":"

Grandstream Networks UCM series supports interconnecting Telstra NTU to work with Telstra Business SIP trunk service. Topology: To register Telstra Business SIP Trunk, we will…<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[6,4,9],"tags":[],"class_list":["post-224","post","type-post","status-publish","format-standard","hentry","category-how-to","category-ippbx","category-sip"],"aioseo_notices":[],"aioseo_head":"\n\t\t\n\t\n\t\n\t\n\t\n\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t